上海申弘閥門有限公司
聯系人：申弘閥門
手機：15901754341
傳真：86-021-31662735
郵箱：494522509@qq.com
地址：上海市青浦區金澤工業園區
英標閥門
上海申弘閥門有限公司
1、BS10:2009
Specification for flanges and bolting for pipes, Valves and fittings
管子、閥門和配件用法蘭和螺栓連接規范上海申弘閥門有限公司主營閥門有：減壓閥(氣體減壓閥,可調式減壓閥,波紋管減壓閥,活塞式減壓閥,蒸汽減壓閥,先導式減壓閥,空氣減壓閥,氮?dú)鉁p壓閥,水用減壓閥,自力式減壓閥,比例減壓閥)、安全閥、保溫閥、低溫閥、球閥、截止閥、閘閥、止回閥、蝶閥、過濾器、放料閥、隔膜閥、旋塞閥、柱塞閥、平衡閥、調節閥、疏水閥、管夾閥、排污閥、排氣閥、排泥閥、氣動閥門、電動閥門、高壓閥門、中壓閥門、低壓閥門、水力控制閥、真空閥門、襯膠閥門、襯氟閥門。
2、BS EN19:2002
Industrial valves—Marking of metallic Valves
通用工業閥門的標記
3、BS EN 545：2010 （電子版）
Ductile iron pipes,fittings,accessories and their joints for water pipelines—Requirements and test methods
4、BS EN 558-2008
Industrial valves—Face-to-face and centre-to-face dimensionsof metal valves for use in flanged pipe systems—PN and Class designated valves
6、BS EN 593:2004
Industrial valves—Metallic butterfly valves
工業閥門—金屬蝶閥
7、BS EN 736-1:1995
Valves—Terminology
Part 1. Definition of types of valves
8、BS EN 736-2：1997（中文版）
閥門—術語 第2篇：閥門部件的定義
10、BS 970:Part 1:1996
Specification for Wrought steels for mechanical and allied engineering purposes Part 1.General inspection and testing procedures and specific requirements for carbon,carbon manganese,alloy and stainless steels
11、BS 970:Part 2:1988
Specification for Wrought steels for mechanical and allied engineering purposes—Part 2:Requirements for steels for the manufacture of hot formed springs
12、BS 970:Part 3:1991
Specification for Wrought steel for mechanical and allied engineering purposes—Part 3:Bright bars for general engineering purposes
13、BS EN 1074-1:2000
Valves for water supply—Fitness for purpose requirements andqppropriate verification tests—Part 1:General requirements
供水用閥門目的要求和適當驗收試驗的合理性，一般要求
14、BS EN 1074-2:2000
Valves for water supply—Fitnese for purpose requirements and appropriate verification tests—Part 2:Isolating valves
供水用閥門對目的要求的符合性及合適的驗證試驗 截止閥
15、BS EN 1092-1:2007(電子版)
法蘭及其連接件—管道、閥門、管件和附件用圓盤法蘭，PN標示——第1篇：鋼制法蘭
16、BS EN 1092-2:1997
Flanges and their joints—Circular flanges for pipes, valves, fittings and accessories, PN designated
法蘭及其接口處—管道、閥門、零配件的環形法蘭，以PN標示
17、BS EN 1092-3:2003
Flanges and their joints—Circular flanges for pipes, valves, fittings and accessories, PN designated—Part 3:Copper alloy flanges
法蘭及其連接件-標注PN的管理、閥門、配件和附件用圓形法蘭-銅合金法蘭
18、BS EN 1092-4:2002
Flanges and their joints—Circular flanges for pipes, valves, fittings and accessories, PN designated—Part 4:Aluminium alloy flanges
法蘭及其連接件-按PN標注的管道、閥門、配件和附件用圓形法蘭-鉛合金法蘭
19、BS EN 1171:2002
Industrial valves—Cast iron gate valves
工業閥門—鑄鐵閘閥
20、BS 1400:1985
Specification for Copper alloy ingots and copper alloy and high conductivity copper castings
銅合金錠、銅合金和高導電性銅鑄件規范
21、BS 1452:1990
Specification for Flake graphite cast iron
片狀石墨鑄鐵規范
22、BS 1501:Part3:1990
British Standard Steels for pressure purposes:plates,sheet and strip Part3.Specification for corrosion-and heat-resisting steels
23、BS 1502:1982
British Standard Specification for Steels for fired and unfired pressure vessels:sections and bars
24、BS EN 1503-1：2000
閥門—閥體、閥蓋及蓋板材料 第2篇 歐洲標準中規定的鋼種
25、BS EN 1503-2：2000
閥門—閥體、閥蓋及蓋板材料 第2篇 歐洲標準中沒有規定的鋼種
26、BS EN 1503-3:2000(中英文版)
Valves—Materials for bodies, bonnets and covers—Part 3: Cast irons specified in European Standards
閥門—閥體、閥蓋及蓋板材料 第3篇 歐洲標準中規定的鑄鐵
27、BS 1506:1990
Specification for Carbon, low alloy and stainless steel bars and billets for bolting material to be used in pressure retaining applications
承壓螺栓連接件用碳素鋼，低合金鋼和不銹鋼棒材和坯料
28、BS 1873:1975（R1990）（中文版）
石油、石化及相關工業用法蘭端和對焊端鋼制截止閥和截止止回閥
29、BS 2779:1986
Specification for Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads (metric dimensions)
非螺紋密封連接的管與配件用管螺紋（米制尺寸）規范
30、BS 2789:1985(部分被BS EN 1563代替)
Specification for Spherical graphite or nodular graphite cast iron
球墨鑄鐵規范
31、BS 2870-1980
Specification for Rolled copper and copper alloys: sheet, strip and foil
輥軋銅和銅合金板材，帶材及箔材
32、BS 2872:1989
Specification for Copper and copper alloy forging stock and forgings
銅和銅合金鍛坯和鍛件規范
33、BS 2873:1969
Specification for Copper and copper alloys wire
銅和銅合金線材規范
34、BS 2874:1986
Specification for Copper and copper alloy rods and sections (other than forging stock)
銅和銅合金棒料與型材（鍛坯除外）規范
35、BS 2875:1969
Specification for Copper and copper alloys plate
銅和銅合金板材規范
36、BS 3076:1989
Specification for Nickel and nickel alloys: bar
鎳和鎳合金棒材規范
37、BS 3100:1991
Specification for Steel castings for general engineering purposes
一般工程用鋼鑄件
38、BS 3416:1991
Specification for Bitumen-based coatings for cold application, suitable for use in contact with potable water
適用于與飲用水接觸用的冷涂瀝青涂層規范
39、BS 3468:1986
Specification for Austenitic cast iron
奧氏體鑄鐵規范
40、BS 4504:Section 3.1:1989
Circular flanges for pipes, valves and fittings (PN designated)
Part3.Steel, cast iron and copper alloy flanges
Section 3.1 Specification for steel flanges
管、閥門及配件用圓法蘭（標注公稱壓力標志數的）第3部分： 鋼、鑄鐵和銅合金法蘭 第1節：鋼法蘭規范
41、BS 4504 section 3.2:1989
Circular flanges for pipes, valves and fitting (PN designated)
Part 3.Steel, cast iron and copper alloy flanges
Section 3.2 Specification for cast iron flanges
管子、閥門及配件用圓法蘭（標注公稱壓力標志數的）第3部分：鋼、鑄鐵和銅合金法蘭 第2節：鑄鐵法蘭規范
42、BS 4504 section 3.3:1989
Circular flanges for pipes, valves and fittings (PN designated)
Part 3.Steel, cast iron and copper alloy flanges
Section 3.3 Specification for copper alloy and composite flanges
管子、閥門及配件用圓法蘭（標注公稱壓力標志數的）第3部分：鋼、鑄鐵和銅合金法蘭 第3節：銅合金和組合法蘭規范
43、BS 5150：1990（中文版）
鑄鐵閘閥
44、BS 5153:1974(R1977、R1982、R1989、R1991)(中文版)
通用鑄鐵止回閥規范
45、BS EN 593:2004(此標準代替BS 5155:84)
Industrial valves—Metallic butterfly valves
蝶閥規范
46、BS 5156:1985（R1990）（中文版）
隔膜閥規范
47、BS 5158：1989（中文版）
鑄鐵旋塞閥
48、BS 5159：1974（R1977、R1982）（中文版）
通用鑄鐵和碳鋼球閥
49、BS 5160:1989（中文版）
鋼截止閥、截止止回閥和升降式止回閥
50、BS 5163-1:2004
Valves for waterworks purposes—Part 1:Predominantly key-operated cast iron gate valves—Code of practice
51、BS 5163-2:2004
Valves for waterworks purposes— Part 2:Stem caps for use on isolating valves and associated water control apparatus— Specification
53、BS EN 10204:2004
Metallic products—Types of inspection documents
54、BS EN 1563:1997
Founding—Spheroidal graphite cast irons
鑄造—球墨鑄鐵
55、BS EN 1982-2008
Copper and copper alloys—Ingots and castiongs
銅和銅合金—金屬塊和鑄件
BS EN 12164-1998
Copper and copper alloys-Rod for free machining purposes
56、BS EN 12266-1:2003
Industrial valves— Testing of valves— Part 1:Pressure tests, test procedures and acceptance criteria— Mandatory requirements
工業閥門-閥門試驗 第1部分 壓力試驗，試驗過程和驗收標準-強制性要求
57、BS EN 12266-2:2002
Industrial valves— Testing of valves— Part 2:Tests,test procedures and acceptance criteria— Supplementary requirements
工業閥門-閥門試驗 第1部分 試驗，試驗過程和驗收標準-補充要求
BS EN 12334-2001
Industrial valves-Cast iron check valves
58、BS EN 12570:2000
Industrial valves—Method for sizing the operating element
工業閥門—確定操作元件尺寸和方法
59、BS EN ISO 17292:2004
Metal ball valves for petroleum, petrochemical and allied industries
石油、石化和相關工業用鋼制球閥
60、BS EN 60529:1992
Degrees of protection provided by enclosures (IP code)
隔離罩（IP規范）提供的保護等級規范本文相關的論文有：中國閥門產值遞增
下一篇：減壓閥在干粉滅火裝置中應用
